1 Cara ngenali port flange ISO 6162-1 lan ISO 6162-2
Waca Tabel 1 lan tokoh 1, mbandhingaké dimensi tombol kanggo ngenali ISO 6162-1 (SAE J518-1 KODE 61) port utawa ISO 6162-2 (SAE J518-2 KODE 62) port.
Tabel 1. Ukuran port flange
| Ukuran flange | Ukuran port flange | ||||||||
| ISO 6162-1 (SAE J518-1 KODE 61) | ISO 6162-2 (SAE J518-2 KODE 62) | ||||||||
| Metrik | Dash | l7 | l10 | d3 | l7 | l10 | d3 | ||
| Sekrup metrik | inch meneng | Sekrup metrik | inch meneng | ||||||
| 13 | -8 | 38.1 | 17.5 | M8 | 5/16-18 | 40.5 | 18.2 | M8 | 5/16-18 |
| 19 | -12 | 47.6 | 22.2 | M10 | 3/8-16 | 50.8 | 23.8 | M10 | 3/8-16 |
| 25 | -16 | 52.4 | 26.2 | M10 | 3/8-16 | 57.2 | 27.8 | M12 | 7/16-14 |
| 32 | -20 | 58.7 | 30.2 | M10 | 7/16-14 | 66.7 | 31.8 | M12 | 1/2-13 |
| 38 | -24 | 69.9 | 35.7 | M12 | 1/2-13 | 79.4 | 36.5 | M16 | 5/8-11 |
| 51 | -32 | 77.8 | 42.9 | M12 | 1/2-13 | 96.8 | 44.5 | M20 | 3/4-10 |
| 64 | -40 | 88.9 | 50.8 | M12 | 1/2-13 | 123.8 | 58.7 | M24 | - |
| 76 | -48 | 106 | 61.9 | M16 | 5/8-11 | 152.4 | 71.4 | M30 | - |
| 89 | -56 | 121 | 69.9 | M16 | 5/8-11 | - | - | - | - |
| 102 | -64 | 130 | 77.8 | M16 | 5/8-11 | - | - | - | - |
| 127 | -80 | 152 | 92.1 | M16 | 5/8-11 | - | - | - | - |
Gambar 1 Ukuran port kanggo sambungan flange
Saka tabel 1, Dash-8 lan -12 ukuran, ukuran sekrup padha lan rapet l7 lan l10 kanggo ISO 6162-1 lan ISO 6162-2, mulane kudu mriksa dimensi l7 lan l10 kanthi teliti, lan diukur kanthi akurasi 1 mm utawa kurang.
2 Cara ngenali penjepit flange ISO 6162-1 lan ISO 6162-2
Waca Tabel 2 lan tokoh 2, tokoh 3, mbandhingaké dimensi tombol kanggo ngenali ISO 6162-1 (SAE J518-1 KODE 61) flange clamp utawa ISO 6162-2 (SAE J518-2 KODE 62) flange clamp.
Yen clamp flange pamisah, mriksa lan mbandhingake ukuran l7, l12 lan d6.
Yen clamp flange siji-potong, priksa lan mbandhingake ukuran l7, l10 lan d6.
Tabel 2. Ukuran flange clamp
| Ukuran flange | Ukuran flange clamp (mm) | ||||||||
| ISO 6162-1 (SAE J518-1 KODE 61) | ISO 6162-2 (SAE J518-2 KODE 62) | ||||||||
| Metrik | Dash | l7 | l10 | l12 | d6 | l7 | l10 | l12 | d6 |
| 13 | -8 | 38.1 | 17.5 | 7.9 | 8.9 | 40.5 | 18.2 | 8.1 | 8.9 |
| 19 | -12 | 47.6 | 22.2 | 10.2 | 10.6 | 50.8 | 23.8 | 10.9 | 10.6 |
| 25 | -16 | 52.4 | 26.2 | 12.2 | 10.6 | 57.2 | 27.8 | 13.0 | 13.3 b |
| 32 | -20 | 58.7 | 30.2 | 14.2 | 10.6 a | 66.7 | 31.8 | 15.0 | 13.3 |
| 38 | -24 | 69.9 | 35.7 | 17.0 | 13.3 | 79.4 | 36.5 | 17.3 | 16.7 |
| 51 | -32 | 77.8 | 42.9 | 20.6 | 13.5 | 96.8 | 44.5 | 21.3 | 20.6 |
| 64 | -40 | 88.9 | 50.8 | 24.4 | 13.5 | 123.8 | 58.7 | 28.4 | 25 |
| 76 | -48 | 106.4 | 61.9 | 30.0 | 16.7 | 152.4 | 71.4 | 34.7 | 31 |
| 89 | -56 | 120.7 | 69.9 | 34.0 | 16.7 | - | - | - | - |
| 102 | -64 | 130.2 | 77.8 | 37.8 | 16.7 | - | - | - | - |
| 127 | -80 | 152.4 | 92.1 | 45.2 | 16.7 | - | - | - | - |
| a, 10,6 kanggo meneng metrik, lan 12,0 kanggo meneng inch | |||||||||
Gambar 2 Split flange clamp
Gambar 3 Clamp flange siji
3 Carane ngenali sirah flange
Saka Tabel 3 lan tokoh 4, mbandhingaké dimensi tombol kanggo ngenali ISO 6162-1 (SAE J518-1 KODE 61) kepala flange utawa ISO 6162-2 (SAE J518-2 KODE 62) kepala flange.
Lan yen ana alur identifikasi dumunung ing circumference saka flange disk, ndeleng tokoh 4 biru ditandhani, iku ISO 6162-2 kepala flange.(tandha iki opsional sadurunge, dadi ora kabeh kepala flange ISO 6162-2 duwe tandha iki)
Tabel 3. Ukuran kepala flange
| Ukuran flange | Ukuran kepala flange (mm) | ||||
| ISO 6162-1 (SAE J518-1 KODE 61) | ISO 6162-2 (SAE J518-2 KODE 62) | ||||
| Metrik | Dash | d10 | L14 | d10 | L14 |
| 13 | -8 | 30.2 | 6.8 | 31.75 | 7.8 |
| 19 | -12 | 38.1 | 6.8 | 41.3 | 8.8 |
| 25 | -16 | 44.45 | 8 | 47.65 | 9.5 |
| 32 | -20 | 50.8 | 8 | 54 | 10.3 |
| 38 | -24 | 60.35 | 8 | 63.5 | 12.6 |
| 51 | -32 | 71.4 | 9.6 | 79.4 | 12.6 |
| 64 | -40 | 84.1 | 9.6 | 107.7 | 20.5 |
| 76 | -48 | 101.6 | 9.6 | 131.7 | 26 |
| 89 | -56 | 114.3 | 11.3 | - | - |
| 102 | -64 | 127 | 11.3 | - | - |
| 127 | -80 | 152.4 | 11.3 | - | - |
Gambar 4 Flange head
Wektu kirim: Jan-20-2022